Clan-X Essays - American Folk Songs, English-language Films

Clan-X There's a new kid at school, his name is Leigh, he thinks he is such a big shot-know all. When he rocked up at school on his very first day, he tried to do a fancy bunny-hop on his crappie, smashed up old bike and stacked it. It was hilarious, especially when he tried to get back on. He just fell straight over it again and broke three of his spokes and started to cry. He walked around school the entire week, showing off in front of everyone, telling them how good he was, trying so hard to be everyone's friend, but we made sure nobody liked him. We were part of a Clan I started called Clan-X. My gang members were: Rene, Grant, Mark, Trent, Tim, Daimien and myself, Cameron. We basically just pushed people around for kicks. Usually people that were half our size and walked around by themselves. We liked to blow up people's letter boxes the most, usually just at random. Whenever any new kids came to our school, we used to tease and make fun of them, so they felt unwelcome and had no friends. Usually they left the school, we loved it when they did that. Anyway, back to the story... On Friday afternoon, just after school, we were all walking home talking about how much of a loser this new guy was. By the time we got to the end of the street, we had all agreed that we should do something totally outrageous to his cat because he had been bragging about it all week. On Saturday, we all met up at the local park and brought along little tools which we thought might come in handy for this sinister exercise. Grant and Rene brought some rope and a switch-blade. Trent and Mark brought a bottle of methylated spirits and some matches. Tim and Daimien brought a voice scrambler and a mobile phone and I brought some explosives, which I got from the local markets. We thought about what we were going to actually do. Finally, I stood up and said, "Okay, First, I will jump Leigh's back fence and grab the cat. I'll take Tim and Daimien with me just in case I can't find it. Grant and Rene can then tie it up to a tree and cut it's whiskers off. Then Trent and Mark can saturate it with methylated spirits, (making sure not to drown it, as we want it to burn alive). You guys can start to run down the street and I'll call up Leigh on the mobile phone and say "Madness takes it's toll, please have exact change." Then I'll throw a K0205 at his front door. When it goes off I'll light the cat up and run. We'll all meet back at the school. Oh, and don't forget, if you get caught, I'll take the heat, my parents couldn't care less if I was at the cop shop." Everyone was silent, Grant and Rene gave me sick grins. Tim quickly stood up and said, "Sure, we toast his cat, and scare the crap out of him, but what does he learn from it?" and then Daimien butted in, "Yeah, his right, we should like leave a note or something." I thought for a second and said, "Okay, when I get home I'll write him a note out of news paper clippings. We'll leave it under his door-mat or something. Everyone put your stuff in my bag here and then we'd better get back to our homes. Be back here at 10:00pm tonight." As I was walking home, I was thinking how funny the look on Leigh's face would be when I lit up that helpless cat, and how confused he would be when he heard the words "Madness takes it's toll, please have exact change." I simply couldn't wait. When I finally got home, I went through all the news papers and all the magazines I could find. After about an hour I had finished the letter. It read: IF YOU DON'T LEAVE THIS SCHOOL BY THE END OF THE WEEK, IT WILL BE YOU THAT BURNS. BUDDY... - LOVE CLAN-X. When I got to the park at 10:00pm everyone was already there, waiting for me. It was dark and everything was silent. Leigh only lived around the corner from the park. I found his address from the very helpful Telstra operator. When we arrived at Leigh's house Daimien and Tim, without saying a word jumped the fence, I followed. We found the cat asleep on the

victomolgy essays

victomolgy essays For as long as I can remember I have always been fascinated with the procedures of law. I would watch Judge Wapner everyday after school. When I graduated high school I was not sure what I wanted to do. It was not until I read about the school shootings out west, and I was shocked and horrified to learn the ages of the kids who brought the guns to school. It seemed to me that there were an increasing number of young kids committing violent crimes. I was so curious and wanted to know what was causing this problem. That is when I decided to go into the field of Criminal Justice. I have written many papers and gave several speeches regarding juveniles and violent crimes. I feel as if we are missing the big picture, our laws that are supposed to protect our children are actually hurting them more. I have criticized several politicians such as Bill Mc Collum on the way they speak about these kids and I think our entire juvenile justice system needs a makeover. One that benefits the children, not lawmakers. This assignment has given me the opportunity to speak to a former juvenile prosecutor, in which I was able to see things from the other side. I asked 5 questions that I thought would best explain the other side of my views on juveniles and crimes. 1. What is your opinion regarding juveniles who commit crimes? She said the kids that she saw really deserved their punishment. That if anything the judges were too lenient. That she saw about 80% of these young offenders again and again. That they never learned their lesson the first or second time. I was surprised to hear the judges were too lenient. I have always heard the opposite. 2. Do you believe in the death penalty for juveniles? She does believe in the death penalty for children 16 and 17. I am totally against that. I feel like a person that age still has a chance to become a productive citizen. So we really disagreed on this question. But I respect h...

When does the use of professional discretion cross ethical boundaries Research Paper

When does the use of professional discretion cross ethical boundaries - Research Paper Example In the process of carrying on with responsibilities at the workplace, an employee would often find it necessary to rein in his personal activities and conduct, this behavior continuous on even if what is being done is not related to the job (Thomas 56). In the business world, consumers always make judgments about a company depending on the actions of its employees. This happens even if the particular activities are done with a positive intention. Professional discretion can be described as the choices an individual makes in his professional duties to be cautious about the things he says or takes part in. People that are fond of making discussions over issues relating to their personal are described as being indiscreet or lacking discretion. Ethics, which are also called moral philosophy, describes a category of philosophy that deals with learning of issues related to right or wrong, as well as the manner in which we are expected to live by such an understanding (Thomas 24). The concept of ethics concerns our ability as human beings to make proper moral judgments concerning practices that are right or wrong in accordance with the societal and moral expectations (Reynolds 23). Right and wrong refers to the qualities or judgments that are placed on people’s actions and their manner of conduct during their daily lives. Ethics play an important role in helping people establish proper moral choices especially when it comes to situations where moral issues are involved. It is important to realize that in our everyday lives, it is a desirable habit to have moral rules. This is not because they are useful in expressing absolute truth, but it is because they offer essential guides as far as normal circumstances of life are concerned. Different views have been raised concerning the need for ethics in our general life and professional activities. One of the views holds that human beings, in their professional and

Discussion broad Essay Example | Topics and Well Written Essays - 250 words - 1

Discussion broad - Essay Example The author has rightly proposed practicing and preparing as two of the important strategies to control meeting stress. I am a Chinese and was recently interviewed in Shanghai. My interview went well because I had thought about the possible questions and prepared answers for them in advance. I also practiced the interview with my friend before the actual interview which gave me a fair idea of the interview. This topic is mentioned in the course book e.g. while preparing for a meeting or an interview, an individual should at least prepare four Ps i.e. â€Å"purpose, product, participants, and probable issues† (Wilkinson, 2012, p. 590). I find this article very informative and useful. It contains very useful pieces of advice that are easily practicable. The author has not only suggested what to do in a meeting to control stress and boost performance, but has also clearly indicated what not to do e.g. not to overprepare or have a crafted and premade answer for every question. I discovered the article recently over the

Modular Approach to Building your ISE Essay Example | Topics and Well Written Essays - 500 words

Modular Approach to Building your ISE - Essay Example A piping designer is capable of using ShipConstructor on top of an instance of AutoCAD P&ID and hence both toolsets are available in the ShipConstructor environment. Similarly, the AutoCAD software is also beneficial for a structural designer as he can take advantages of AutoCAD Mechanical while working with ShipConstructor. In other words, the ShipConstructor software bears the benefits of the AutoCAD system as it is installed on top of the AutoCAD software. This modular approach to building an Integrated Shipbuilding Environment (ISE) would bear notable benefits as modern shipyards widely practice this technique. Since the ShipConstructor software uses a specific geometry model, it is easy to integrate different concepts. Accuracy is another potential benefit of using the ShipConstructor software. By using this system, designer can shape a shipyard to a given scale in accordance with specific requirements. The most fascinating feature of this system is that it is cost effective as the newly designed products can be easily integrated into the existing design of the shipyard.

Creation of a Versatile Computer System: CPU and RAM

Creation of a Versatile Computer System: CPU and RAM Jay Kybert I have tried to create a versatile computer system that everyone can use, with a few exceptions. The CPU, RAM, Motherboard, etc. remains the same throughout each system, however certain people require different inputs, outputs etc. In these cases, I have changed the computer system slightly and recorded the price. Link to website used: https://uk.pcpartpicker.com/list/dG7cBP All prices were accurate at the time this was created. This CPU is an older generation but remains a great CPU. I could have chosen an i7 model for the hyper-threading but, along with the increase in price; other components may need to be upgraded to avoid a bottleneck. The 2.7GHz should provide a good level of speed, but overclocking is an option in case it is not fast enough however, this is not recommend for general work use due to the risk. Its power consumption is fairly low for a CPU, at 65 watts. The PSU is fully capable of supplying power to all of the components. It uses the socket 1151 (meaning 1151 pins). However, on this CPU, the motherboard houses the pins instead of the CPU itself. This cooler has a moderately sized heatsink and a fan to push (or pull) air around the CPU. It is compatible with the motherboard the computer will have too. Since I went with a mid-tier CPU, I needed a good level of cooling but nothing massive. This is why I settled for a heat sink and fan, compared with a higher tier water-cooled system. Another reason I chose a traditional heat sink of water-cooling is because of the possibility of water leaking and the management/replacement of water, which can be a difficult task to carry out safely. I chose this specific thermal paste simply due to its cost. There are more efficient compounds available but for a much higher price. In addition, this thermal paste will last a long time if used correctly, which provides a great value for money. This motherboard is a standard ATX motherboard, which fits the chipset on the CPU. In addition, I decided to spend a little more on this motherboard for its newer features. Since it is more modern, there is always the option to upgrade components. This motherboard does fit inside the computer case I have selected with enough room left for cable routing. It has four available RAM slots, which will be more than enough memory for everyone. I chose to go for 16GB since some designing software stresses the memory. In addition, this memory is DDR4, the newest but only type of memory that the motherboard I chose supports. It runs at 2133 MHz, which should provide a good level of performance and allow for upgrades since it only uses two of the four RAM slots on the motherboard. There are lots of different HDDs available but I chose Western Digital since it is a well-known company. I opted for a 3.5 HDD since they spin faster than laptop drives and my case has space for it. This means that the HDD will be able to read and write data slightly faster than other models. Furthermore, I chose 1TB which should be enough storage for a single work computer. This graphics card is part of the newest generation of NVIDIAs GPUs. Although it is one of the lower-end cards, it can run intensive stress tests and benchmarks at a steady usage at 1080p. It is more than enough for designing software at HD resolution, with 4GB of VRAM it should be able to render and load these designs with ease. It is compatible with the motherboard and has room in the case to fit. I chose this case since it can fit an ATX motherboard (The Z170 I Chose is an ATX). Also, there is lots of room for expansion within the case. There is room for an optical drive which may be useful. Furthermore, there is a lot of room for 120mm/140mm fans that will keep the computer cool and running stable. Finally, there is enough room inside the case the house the GPU. I chose this PSU since it supplies 500W of power which is more than enough for the current system. In addition, it is an ATX PSU which is compatible with the case. It also is certified (even though it is only bronze) which shows its efficiency and that it doesnt produce much heat. I chose to spend a little more money than what was necessary on the PSU since faulty or poor quality PSUs can destroy other components. The total wattage of the computer is   ~235 watts. This means I could have bought a 300w PSU but along with that being barely enough, a 500w PSU also allows the computers to be upgraded without having to worry about power consumption. Modern optical drives are compatible with most computers. I made sure my case supports an optical drive so there will be no compatibility issues or lack of space for this component. I couldve spent some more money on the optical drive and chose a different model that may have been more reliable or come with warranty but I decided to save money since the optical drive wont be used frequently anyway. The only time this will see use is when using older software that requires a disc installation. Even though Windows 7 isnt the newest Windows OS, many people are comfortable using it and grew up with it (or similar versions). The jump to 8/8.1 and 10 have drastically changed the layout and general use, making it harder to use. This is why I chose an older version that people are happy with. It is also 64-Bit which supports more applications and has more advanced compatible hardware. I chose a standard HD (1080p) monitor. Asus is a reliable brand so the image quality should be great; this is especially good for designing software. I couldve gone for a 1440p or 4k monitor but, for the price, they werent worth it. It has several ports that the graphics card supports so it can easily connect. In addition, if I chose a higher resolution monitor, I would also need to upgrade the graphics card due to the amount of pixels. The keyboard didnt require a specific model, I chose from a well-known brand that produced a well-received keyboard. It uses a USB 2.0 connection between the motherboard (which is compatible with the current motherboard). I chose this mouse because it is from a trusted brand and the fact that it is wireless. This means that there will be fewer wires running across desks. This mouse works by using USB wireless transmitter. As a result, there may be a little latency between movement and it appearing on the screen, but I believe that having a wired mouse may cause problems as it can catch on objects and tear over time or even break the motherboard port if ripped out. I chose to buy a total of six fans (3 dual packs) since the case I purchased supports this many. The front of the case supports 2x120mm or 2x140mm fans, the top supports the same and the back has a 120mm fan as well as the bottom. The front fans can be intakes, along with the bottom, while the top and rear fans can be exhaust fans, blowing air out. Having the same amount of fans blowing in and out make the case have neutral pressure, compared with positive or negative pressure, which can lead to dust build up, or higher temperatures. I chose to purchase a wired network adapter using a PCI-E connector that will allow the computer to have internet access using a wired (Ethernet connection). The motherboard I chose supports this type of connection. Type of Work: Designs kitchens in 3D * Wants a brand new computer built from scratch. * Has RSI. *Requires scanning in documents. *Two mobile devices for communicating. *Fully networked computers system. I chose to stay with a mouse even though Mr Ramsey has RSI and this may affect his ability to use it. A mouse is this optimal choice for an input device due to its versatility across a number different uses, especially in design software that requires accuracy. However, I chose a vertical mouse since this might prove to be a great substitute rather than a normal mouse. A vertical mouse reduces the strain in the arm and keeps the arm in a relaxed state; this could reduce the pain from RSI. This All-in-One printer can print, scan, copy and fax which should be enough options. As well as being wireless, the printer can print up to 22 pages per minute in black and 18 per minute with colour with a DPI resolution of 12001200. Again, this proves that this machine is fast as well as efficient. The only reoccurring cost is the ink that needs to be replaced occasionally. I chose this phone for communication since it is from a respected brand that has good customer service. This means that if there were any faults, it should be easy enough to resolve, it also means that the build-quality and specifications of the phone are competitive with other brands, meaning the phone has good internal hardware. Since Mr Ramsey requires two mobile devices for communicating, I chose to buy two of the same model since it makes it easier for him to use both as he doesnt have to learn to use two different OSs. Deals with the customers and take down the requirements and measurements of the customers kitchens. *Needs brand new complete computers. *Aadi is left handed. * Require to take photographic evidence of the customers kitchens. I chose this mouse because of its left-handed design. This means that Aadi can use this mouse normally. Even though the mouse is expensive, it comes from a well-known company that specialises in peripherals. Also, the mouse has a variety of adjustable settings, an example being DPI which can be changed to what Aadi prefers. Petra, Aadi and Soolin all required a camera for their work; I decided on this CANON EOS. It is a DLS camera with 18 megapixels, which will provide a 1080p photo. In addition, this model has a sharp LCD screen to change the settings to what is preferred. Another reason I chose this camera is its wireless feature. Once Petra/Aadi/Soolin has taken photos, they dont need to transfer them via a USB or SD card. Instead, the camera is a wireless storage device as well, meaning that the photos can be accessed from their computers without any physical, wired connection. Confirms the order with the customer and looks after the payments. NOTE: The cost of this Microsoft package is  £11.30 monthly. A year of this works out at  £135.60. The reason I chose this package was that it included both the communication software (Skype) and the recording information software (Excel). In addition, this package comes with office essentials like Word, PowerPoint, etc. Since this is a subscription, Brian will be given an email needed to use this software; this means that the software can be used anywhere, as long as the email is provided. In addition to this, there are other benefits to the business premium package like 50GB for emails, 1TB Cloud Storage, HD Video Conferencing and more. Contacts suppliers when stock is low and maintains the stock levels. Sends out the kitchen units and supplies to the customer with a delivery note. * Has a slight visual impairment. * Requires software to look after the records. * Each package has a barcode so it can be tracked. Due to Tsais visual impairment, I thought I higher resolution screen could help him see the screen more clearly. Also, I decided on a 27-inch screen that is larger than a standard office monitor, which should help with his visual impairment. Furthermore, I decided against getting a higher refresh rate monitor. There were choices of 120Hz or even 144Hz but this wouldnt really affect the visual impairment, it would just make transitions smoother and they are more expensive. NOTE: The cost of this Microsoft package ( £11.30) is a monthly recurring payment. A year of this works out at  £135.60. Like with Brian, the Office 365 Business Premium is a subscription-based software which will allow Tsai to look at records. Using network-attached storage (NAS) or a central server, Brian can wirelessly share any excel spreadsheets or databases with Tsai and vice versa. Also, Tsai is a warehouse manager which could mean he isnt always sitting at a desk. Therefore, he can use the Office 365 software on a phone or tablet. This printer will allow Tsai to create and print off any barcodes to track packages. It has an Ethernet and USB port, the Ethernet being for a connection to the internet to print of barcode designs and the USB for a connection to the computer itself. This barcode scanner can identify barcodes and the package assigned to it. This will make managing a warehouse easier as rather than using serial numbers or other methods of recording lots of information, a barcode can be applied to all packages. This means that in the future, a database can hold all of the information and by scanning a barcode, information is given about the item.

The Wedding by Nicholas Sparks Essay -- The Wedding by Nicholas Sparks

â€Å"The Wedding† by Nicholas Sparks The novel â€Å"The Wedding† by Nicholas Sparks is a sequel to the love story, The Notebook. The characters in this novel are facing pretty much one big problem. The setting in this story is taken place in the year 2003 in a little place called New Bern, where the lives of the Lewis family would change in many ways. Wilson and Jane Lewis; a married couple for many years, are the main characters in this novel. They are facing a very difficult time in their lives. It seems as if Jane has fallen out of love with Wilson. Wilson is the kind of guy who spends far too much time at work. He knows he should be spending more time at home, but just never could find the time to do so. During the course of their life, they had kids and did everything a normal f...